Riding a bike or scooter for your everyday commute saves a significant amount of time. Furthermore, if you go a big distance every day, you may be wondering how to boost the mileage of your bike. Maintaining your bike properly, riding it in a way that does not put additional strain on the engine, and reducing fuel consumption can all be accomplished with relative ease. It will not only save you money, but it will also keep you safe on India's congested roadways.

Follow the following suggestions and tactics to make your two-wheeler journey more cheap and safe:

1.Maintenance and service:

Proper bike maintenance and regular servicing are critical for keeping your two-wheeler performing at its peak. This would also improve your vehicle's fuel economy because the gearbox and engine require lubrication to work properly. It is highly advised that you have your scooter maintained according to the instructions in your motorbike care guide. Your vehicle's performance may be improved by changing the oil, optimising the level of coolant oil, and lubricating the chain. If you believe that your engine is leaking oil, have it repaired as soon as possible.

2. Maintaining Proper Tire Pressure:

To enhance the mileage of your scooter or bike, keep the tyre pressure at specified levels. It is the rider's responsibility to ensure that the tyres are inflated to the pressure recommended by the vehicle manufacturer. Typically, tyres contain recommended tyre pressure marks. Check the bike manufacturer's manual for correct instructions if you wish to carry extra load on your vehicle. Maintaining proper tyre pressures can not only extend the life of your two-wheeler tyres, but will also enhance your bike's overall performance and fuel economy.

3. Avoid running the engine unnecessarily:

When your bike is parked or not in use, leaving the engine running might result in fuel waste. It is critical to avoid the habit and turn off the ignition anytime the delay exceeds 10 seconds. With every two-wheeler now equipped with a self-start button, shutting off the engine should be simple. In addition, engines no longer need to be warmed up in the winter, and you may drive about without unduly revving your engine.

4. Avoid Using Clutch Override:

Excessive clutch usage should be avoided as much as possible. Many two-wheeler riders override the clutch, especially when it is not in use. This can waste a lot of gasoline when it isn't necessary. Using suitable ratios in a bumper-to-bumper traffic condition may easily avoid clutch over-riding. This can also help you extend the life of the clutch plate and save money on fuel.

5. Reasonable gearing:

To avoid overworking your vehicle's engine, go to higher ratios as soon as possible. This will make your bike's engine operate more smoothly and will significantly boost the mileage of your bike or scooter. It should also be noted that the higher the speed of your car, the greater the fuel consumption. On third gear, a 150cc motorbike may easily reach speeds of 55-60 kph. Excessive speed puts strain on your engine and results in increased fuel consumption. Overspeeding is not only harmful to your life, but it also reduces your vehicle's fuel economy.

6. Use High-Quality Fuel:

Using higher-quality, more refined oil helps extend the life of your engine and improve fuel economy. Although these fuels might be costly, they are unquestionably worthwhile for the benefits they provide.

7. Avoiding Traffic:

It may appear nonsensical, as you cannot physically avoid traffic all of the time. However, riding in traffic wastes a lot of gasoline, which may be avoided in certain ways. To begin, if you drive to a specific destination on a daily basis, choose the route with the least traffic. Furthermore, there are instances when traffic is particularly heavy. If you start early, you won't have to deal with excessive traffic and wear out your vehicle. Driving aggressively in traffic will reduce your vehicle's fuel economy, so try to avoid it as much as possible.

8. Make use of Google Maps/GPS:

Using GPS can assist you in selecting the shortest and best route with the least traffic. While some may be unsure how to utilize a GPS device while riding, there are various devices available these days that will tell you of potential route possibilities without interfering with your ride. While riding, you may listen to voice instructions through Bluetooth headphones.

9. Ride Caution:

Most importantly, ride safely. Sudden acceleration or braking might degrade your vehicle's performance. This approach also wastes a lot of fuel. Riding at consistent speeds and gently slowing the bike will not only extend the life of your vehicle but will also help you save a substantial amount of gasoline.

Gasoline economy has always been one of the main worries among bike and scooter owners in India, and the techniques given above may undoubtedly be a lifesaver in operating your vehicles at peak efficiency and getting the most out of your fuel.