The dashboard of your automobile has a variety of indicators that show how vital parts are operating. The Check Engine light, which is related to engine performance, is one such indicator. Ignoring this signal might put your car in danger of having major issues. To learn what to do when the Check Engine light illuminates, read on.
The meaning of the Check Engine light
The Check Engine Light, commonly known as the Malfunction Indicator Light or MIL, indicates that there is a problem with the engine. One of the numerous diagnostic systems in your automobile that tracks the operation of the vehicle and flags potential issues is this one.
The indicator to inspect the engine is the on-turned engine light, which is recognized globally. Every time the ignition is turned on, the diagnostic system performs a number of powertrain checks. The Check Engine light may signal problems in one of two ways, according to the system's analysis.
1) A constant Check Engine indicator
What a constant Check Engine light implies is as follows.
Your engine is requesting a routine checkup when the Check Engine light is on continuously.
If you don't notice anything out of the ordinary, it might not be urgent or noteworthy.
You can continue to drive and get it looked at later.
2) A flashing Check Engine indicator
Here is what a Check Engine light that is blinking or flashing implies.
Your engine needs immediate maintenance if the light is flashing.
The automobile has to be parked as soon as you can in a secure area.
Engine parts may suffer severe damage if you drive while your engine light is flashing.
Call a qualified mechanic to your place for a checkup or have your automobile towed.
The Check Engine light comes on for what reason?
Here are a few causes of the Check Engine light to illuminate.
1. Engine problems
The performance of the engine in your automobile is monitored by a number of sensors. So, when a problem is found, the Check Engine light comes on.
2. An emission issue
Every automobile produced in this decade includes a variety of emission-control devices. A catalytic converter, gas recirculation, an evaporative emission system, etc. are examples of emission components. Each component has a specific function, and if any of them has a malfunction, the Check Engine light may come on.
3. a defective transmission
Power is transferred from the engine to the wheels through the gearbox of an automobile. As a result, you might argue that the engine and gearbox components are rather interdependent, which explains how any problems with the transmission could set off the Check Engine light.
4. Sensor and module problems
Modern powertrains gather data, analyze it, and connect with other modules using a variety of modules and sensors. The Check Engine light might come on as a result of any problems with the network, modules, or sensors. For instance, defective oxygen or airflow sensors might transmit inconsistent data that can turn on the Check Engine light.
5. Abrupt air and fuel supply
Accurate fuel and airflow is also necessary for the engine of an automobile to operate properly. The Check Engine light could come on if the control module detects an abnormal rise or fall in the amount of gasoline or air in the engine.
6. Ignition-related issues
Coil packs, spark plugs, and other parts of the ignition system are used to ignite the engine's combination of gasoline and air. The control module will activate the Check Engine light if the spark plugs or any other part of the ignition system develops a malfunction.
7. A loose or open gas tank lid
Although it may seem unimportant, the performance of the engine might be impacted by a loose or opened fuel tank cover. It alters the pressure across the entire system, increasing emissions and decreasing mileage. The Check Engine light may come on as a result of everything.
How should I respond if the Check Engine light comes on?
Here are some instructions for turning off the Check Engine light if it comes on.
1. Secure the fuel tank lid.
Sometimes the light is simply activated by a loose gasoline tank top. Therefore, the first thing you can do is check the fuel tank top and tighten it if it seems loose.
2. Try lowering the speed and load.
The engine of your car may be under too much stress from excessive weight or speed. Small automobiles frequently exhibit this when traveling at high speeds on highways. The added strain may have a detrimental effect on the engine's operation and result in faults. In order to switch off the engine light, lower your speed or, if feasible, the load size.
3. Take note of further signs
If the Check Engine light is on, you should look at additional signs to determine the severity of the issue. Your car's dashboard lights or gauges will alert you to issues like overheating, low oil pressure, and other issues. In such circumstances, you should immediately turn off your car's engine and park it as soon as you find a secure location.
4. Execute tests
You may utilize the built-in diagnostic system in your car to figure out what's wrong when the Check Engine light comes on. Alternatively, take it to a qualified mechanic who will be able to interpret the information produced by the built-in diagnostic system and choose the best course of action.
Speaking at a news conference, Gahlot said that 7,046 electric cars were sold in December and that among all states and Union Territories, Delhi had the highest percentage of EV sales that month.More
The standard operating procedure (SOP) for validating the national highway (NH) network and other logistics and related infrastructure projects on the PM GatiShakti portal has been released by the Union Ministry of Road Transport and Highways.More
Under the Faster Adoption and Manufacturing of Electric Vehicles in India (FAME) initiative, the Indian government is compensating electric car and hybrid vehicle manufacturers for lowering the purchase price of their vehicles.More